Northern Insulation & Pipeline Stockists Ltd (NIPS) – Kolor Kut Products
Water Finding Paste
Kolor Kut Water Finding Paste is golden brown in colour and turns brilliant red upon contact with water. This product will successfully gauge water content in all petroleum and hydrocarbons as well as sulphuric acid, nitric acid, hydrochloric acid, ammonia, soap solutions, salt and other chloride solutions.
Packaged in 3oz tubes only.
Directions: Place a think film on a clean gauge line or rod to the approximate point where water level is expected to appear. Lower tape into tank until bottom is reached. Level will appear by positive contrast of colours. Instantaneous in gasoline, diesel, kerosene and gas oils. Heavy oils require a few seconds.
Kolor Kut Gasoline Gauging Paste
Light pink in colour, it turns red on contact with gasoline, diesel, naptha, kerosene, gas oil, crude oil, jet fuels and other hydrocarbons. It is a most effective product level indicator.
- Packaged in 2.25oz plastic jars only.
- Store at temperature range of 35F to 115F for preservation of the product.
Kolor Kut Modified Water Finding Paste
Designed for use in Methanol, Ethanol enriched fuel systems. Alcohols are soluble in fuels in all proportions when they are water-free but relatively small amounts of water can cause separation of alcohol from the fuel. The mixture settling to the bottom of the tank contains a high concentration of alcohol and cannot be detected by most water detection pastes.
Kolor Kut Modified Water Finding Paste changes from dark brown in colour to bright red on contact with water. Phase separated alcohol solutions with as little as 6% water will turn the paste yellow. This product is designed for use in reformulated and oxygenated fuel systems. After testing, it seems that alcohol or deicing agents in fuels have very little effect on performance of the product.
- Packaged in 2.5oz tubes only.
- Conforms to MIL-W-83779